Liquid-crystal display equiped with HD44780 integrated circuit

This library written in Go programming language to control parameters of and output alpha-numeric characters to liquid-crystal display equiped with HD44780 integrated circuit (pdf reference). This code intended to run from Raspberry PI to get control above liquid-crystal display via i2c bus controller (soldered to lcd-display on the back side).

There is some variety in display size, so library was tested with two kinds (width x height): 16x2 and 20x4 (pictures 1 and 2 correspond to 16x2 display, picture 3 - 20x4 display):

Compatibility

Tested on Raspberry PI 1 (model B) and Banana PI (model M1).

Golang usage

func main() {
  // Create new connection to i2c-bus on 2 line with address 0x27.
  // Use i2cdetect utility to find device address over the i2c-bus
  i2c, err := i2c.NewI2C(0x27, 2)
  if err != nil { log.Fatal(err) }
  // Free I2C connection on exit
  defer i2c.Close()
  // Construct lcd-device connected via I2C connection
  lcd, err := device.NewLcd(i2c, device.LCD_16x2)
  if err != nil { log.Fatal(err) }
  // Turn on the backlight
  err = lcd.BacklightOn()
  if err != nil { log.Fatal(err) }
  // Put text on 1 line of lcd-display
  err = lcd.ShowMessage("--=! Let's rock !=--", device.SHOW_LINE_1)
  if err != nil { log.Fatal(err) }
  // Wait 5 secs
  time.Sleep(5 * time.Second)
  // Output text to 2 line of lcd-screen
  err = lcd.ShowMessage("Welcome to RPi dude!", device.SHOW_LINE_2)
  if err != nil { log.Fatal(err) }
  // Wait 5 secs
  time.Sleep(5 * time.Second)
  // Turn off the backlight and exit
  err = lcd.BacklightOff()
  if err != nil { log.Fatal(err) }
}

Getting help

GoDoc documentation

Installation

$ go get -u github.com/d2r2/go-hd44780

Troubleshoting

How to obtain fresh Golang installation to RPi device (either any RPi clone): If your RaspberryPI golang installation taken by default from repository is outdated, you may consider to install actual golang mannualy from official Golang site. Download tar.gz file containing armv6l in the name. Follow installation instructions.
How to enable I2C bus on RPi device: If you employ RaspberryPI, use raspi-config utility to activate i2c-bus on the OS level. Go to "Interfaceing Options" menu, to active I2C bus. Probably you will need to reboot to load i2c kernel module. Finally you should have device like /dev/i2c-1 present in the system.

How to find I2C bus allocation and device address: Use i2cdetect utility in format "i2cdetect -y X", where X may vary from 0 to 5 or more, to discover address occupied by peripheral device. To install utility you should run apt install i2c-tools on debian-kind system. i2cdetect -y 1 sample output:

     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- 76 --

NOTE 1: Library is not goroutine-safe, so use synchronization approach when multi-gorutine output expected to display in application.

NOTE 2: If you experience issue with lcd-device stability play with strobe delays in routine writeDataWithStrobe(data byte). Default settings: 200 ms (microseconds) for setting stober, and 30 ms for exposing it to zero. Try to increase them a little bit, if you expirience any malfunction.

Credits

This is a fork from completely similar functionality (https://github.com/davecheney/i2c), but due to the some uncertain issues does not work for me. So, it was rewritten with additional code modification.

Contact

Please use Github issue tracker for filing bugs or feature requests.

License

Go-hd44780 is licensed inder MIT License.

4.9 KiB Raw Blame History