Makefile now supports gok

.editorconfig

@@ -10,6 +10,8 @@ insert_final_newline = true
 
 [*.md]
 trim_trailing_whitespace = false
+indent_style = space
+indent_size = 2
 
 [*.{conf,hcl,json,xml,yml}]
 indent_style = space

Makefile

@@ -1,8 +1,9 @@
-build:
-	cd cmd/fermentord && GOARCH=arm GOARM=6 GOOS=linux go build
+GOK := gok --parent_dir ./deployments --instance fermentor
 
-install: build
-	scp cmd/fermentord/fermentord fermentor.env.s18.joco.dk:
-	ssh -t fermentor.env.s18.joco.dk sudo ./deploy.sh
+edit:
+	$(GOK) edit
 
-.PHONY: build install
+update:
+	$(GOK) update
+
+.PHONY: edit update

README.md

@@ -2,90 +2,35 @@
 
 Control the temperature of your fermentation process.
 
-# Integrations
+## Integrations
 
-* NATS
-* Prometheus
-* Sentry
+- NATS
+- Prometheus
+- Sentry
 
-# Epics
-
-## Heater/Cooler
-
-| Persona  | Description                                                                    |
-|----------|--------------------------------------------------------------------------------|
-| Brewer   | The person responsible for the wort and the fermentation process               |
-| Operator | The person responsible for the fermentation tank and the system controlling it |
-
-*As a brewer I need to maintain the wort at a specific temperature so that my fermentation process is predictable*
-*As an operator I need an alert if the system can't maintain the temperature, so that I may correct the problem*
-
-## Ambient temperature
-
-* Ambient temperature
-* Case temperature
-* Wort temperature
-* Wort gravity
-
-# User stories
-
-## Acceptance criteria
-
-* Given the wort is at or above the requested temperature and the heater is running then stop the heater
-* Given the wort is above the requested temperature and the heater is not running then start the cooler
-* Given the wort is above the requested temperature
-
-* Given the wort is too cold and the cooler is running then stop the cooler
-* Given the wort is too cold and the cooler is not running then start the heater
-
-* Given the cooler is running
-* Given the cooler is running when then the heater may not start
-* Given the heater is running then the cooler may not start
-* Given the temperature is 
-
-# Data logging
-
-* Ambient temperature
-* Case temperature
-* Wort temperature
-* Wort gravity
-
-* Data is stored in sqlite3
-* Data is scraped and stored in PostgreSQL
-* Data is removed from sqlite3 when confirmed in PostgreSQL
-
-# Metrics
+## Metrics
 
 Prometheus metrics
 
-* Ambient temperature
-* Chamber temperature
-* Wort temperature
-* Wort gravity
-* Heater state
-* Cooler state
-* Tank pressure
+- Ambient temperature
+- Chamber temperature
+- Wort temperature
+- Wort gravity
+- Heater state
+- Cooler state
 
-# Drivers
+## Build
 
-On the Raspberry Pi you'll need to add `dtoverlay=w1-gpio` (for regular
-connection) or `dtoverlay=w1-gpio,pullup="y"` (for parasitic connection)
-to your /boot/config.txt. The default data pin is GPIO4, but that can be
-changed from 4 to x with `dtoverlay=w1-gpio,gpiopin=x`.
+The firmware is built for [gokrazy](https://gokrazy.org). Identify the device
+for your SD-Card, then run the command below to overwrite it. Ensure that no
+partitions are mounted on the card prior to running the command.
 
 ```bash
-echo dtoverlay=w1-gpio,gpiopin=4,pullup=0 >> /boot/config.txt
-
-modprobe wire
-modprobe w1-gpio
-modprobe w1-therm
+gok --parent_dir ./deployments --instance fermentor overwrite --full <device>
 ```
 
-# Build
+## TODO
 
-A Raspberry Pi 1 is used, so we compile for ARMv6.
-
-```bash
-cd cmd/fermentord
-GOARCH=arm GOARM=6 GOOS=linux go build
-```
+- hardware: Fix the LCD display contrast by adding a 3v3/5v logic level converter
+- firmware: Add a way to control the runtime configuration
+  - use nats to control the runtime parameters