.editorconfig

@@ -10,8 +10,6 @@ insert_final_newline = true
 
 [*.md]
 trim_trailing_whitespace = false
-indent_style = space
-indent_size = 2
 
 [*.{conf,hcl,json,xml,yml}]
 indent_style = space

Makefile

@@ -1,9 +1,8 @@
-GOK := gok --parent_dir ./deployments --instance fermentor
+build:
+	cd cmd/fermentord && GOARCH=arm GOARM=6 GOOS=linux go build
 
-edit:
+install: build
-	$(GOK) edit
+	scp cmd/fermentord/fermentord fermentor.env.s18.joco.dk:
+	ssh -t fermentor.env.s18.joco.dk sudo ./deploy.sh
 
-update:
+.PHONY: build install
-	$(GOK) update
-
-.PHONY: edit update

README.md

@@ -2,35 +2,90 @@
 
 Control the temperature of your fermentation process.
 
-## Integrations
+# Integrations
 
-- NATS
+* NATS
-- Prometheus
+* Prometheus
-- Sentry
+* Sentry
 
-## Metrics
+# Epics
+
+## Heater/Cooler
+
+| Persona  | Description                                                                    |
+|----------|--------------------------------------------------------------------------------|
+| Brewer   | The person responsible for the wort and the fermentation process               |
+| Operator | The person responsible for the fermentation tank and the system controlling it |
+
+*As a brewer I need to maintain the wort at a specific temperature so that my fermentation process is predictable*
+*As an operator I need an alert if the system can't maintain the temperature, so that I may correct the problem*
+
+## Ambient temperature
+
+* Ambient temperature
+* Case temperature
+* Wort temperature
+* Wort gravity
+
+# User stories
+
+## Acceptance criteria
+
+* Given the wort is at or above the requested temperature and the heater is running then stop the heater
+* Given the wort is above the requested temperature and the heater is not running then start the cooler
+* Given the wort is above the requested temperature
+
+* Given the wort is too cold and the cooler is running then stop the cooler
+* Given the wort is too cold and the cooler is not running then start the heater
+
+* Given the cooler is running
+* Given the cooler is running when then the heater may not start
+* Given the heater is running then the cooler may not start
+* Given the temperature is 
+
+# Data logging
+
+* Ambient temperature
+* Case temperature
+* Wort temperature
+* Wort gravity
+
+* Data is stored in sqlite3
+* Data is scraped and stored in PostgreSQL
+* Data is removed from sqlite3 when confirmed in PostgreSQL
+
+# Metrics
 
 Prometheus metrics
 
-- Ambient temperature
+* Ambient temperature
-- Chamber temperature
+* Chamber temperature
-- Wort temperature
+* Wort temperature
-- Wort gravity
+* Wort gravity
-- Heater state
+* Heater state
-- Cooler state
+* Cooler state
+* Tank pressure
 
-## Build
+# Drivers
 
-The firmware is built for [gokrazy](https://gokrazy.org). Identify the device
+On the Raspberry Pi you'll need to add `dtoverlay=w1-gpio` (for regular
-for your SD-Card, then run the command below to overwrite it. Ensure that no
+connection) or `dtoverlay=w1-gpio,pullup="y"` (for parasitic connection)
-partitions are mounted on the card prior to running the command.
+to your /boot/config.txt. The default data pin is GPIO4, but that can be
+changed from 4 to x with `dtoverlay=w1-gpio,gpiopin=x`.
 
 ```bash
-gok --parent_dir ./deployments --instance fermentor overwrite --full <device>
+echo dtoverlay=w1-gpio,gpiopin=4,pullup=0 >> /boot/config.txt
+
+modprobe wire
+modprobe w1-gpio
+modprobe w1-therm
 ```
 
-## TODO
+# Build
 
-- hardware: Fix the LCD display contrast by adding a 3v3/5v logic level converter
+A Raspberry Pi 1 is used, so we compile for ARMv6.
-- firmware: Add a way to control the runtime configuration
+
-  - use nats to control the runtime parameters
+```bash
+cd cmd/fermentord
+GOARCH=arm GOARM=6 GOOS=linux go build
+```